SYNCHRONIZATION PANELS
Synchronization boards are the ones that start and operate all auxiliary power units consisting of backup generators in case the mains power is cut off or the voltage differences between phases reach levels that will damage the system in the facilities that cannot tolerate long-term power cuts, and the units synchronize with each other to keep the one that will meet the demand power and deactivate the others. with the logic of justification regulatory boards. After observing that the mains voltage is back in a proper way, it synchronizes the generator busbar with the mains busbar, transfers all loads to the mains busbar uninterruptedly, stops the generators at the end of the engine body cooling period. Although this is the basic logic, additional functions such as load shedding-loading, calling additional generators or changing generators can be produced from a synchronization and parallel operating panel.
Basic Specifications of Synchronization Panels by LINK PANEL
- Depending on request, it can be 3 or 4 poles,
- Load Sharing, load transfer functions,
- Manual and Automatic Synchronization,
- Capacity up to 6300A
- Load transfer in various combinations using ACB, MCCB and Contactor,
- Flexible structure in line with customer demands,
- Integrated synchronization panel with engine monitoring, engine warm-up and cooling time functions,
- Monitoring and alarming the instantaneous values of the engine part of each generator unit within the scope of multiple synchronization,
- It also provides the opportunity to monitor and record start/stop, test, body heating and idle cooling functions.
- Protection class up to IP55.